Data date: 15 November 2026. The comparison covers grade, chemical name, colour, acid value, viscosity, purity or active content, and applications. Acid value is expressed in mgKOH/g and viscosity in mPa·s at 25 C. KM values come from the JCCM KM-series TDS; competitor values come from public TDS, supplier data or distributor information. Values marked with * should be reconfirmed against the manufacturer's current TDS/COA.
Quick conclusions
- KM2110 follows the HEMA-phosphate route: its public chemical name matches Eternal ETERMER 39. Kyoeisha LIGHT ESTER P-1M is also a HEMA-phosphate product but has a much higher public acid value and viscosity, favouring high-acidity and emulsion-stability systems.
- KM2110 follows the HEMA-phosphate route: Nippon Kayaku KAYAMER PM-2 belongs to the same structural chemistry. KM2120 is a bis-HEMA phosphate and should not be grouped with PM-2 as the same structure.
- Low viscosity and high crosslinking: KM2160 has a published viscosity of 180–270 mPa·s. Sartomer SR9051 is HEMA phosphate diluted in TMP(3EO)TA, so its acid value, viscosity and purity cannot be compared directly with an undiluted monomer.
- Flexibility and difficult substrates: KM2140 combines a lower acid value with higher viscosity and is positioned for flexibility, wetting and water resistance in nail gels, leather, asphalt modification and difficult substrates.
- Waterborne metal adhesion: Solvay SIPOMER PAM-300 is a phosphate ester of PPG monoacrylate with an acid value of 110–115 and active content of 95–97%. Its positioning differs from HEMA-phosphate monomers.
KM series public data
KM2110
- Chemical name: 2-hydroxyethyl methacrylate phosphate (HEMA-P, predominantly monoester).
- Colour ≤30 Hazen; acid value 265–315 mgKOH/g; viscosity 700–1400 mPa·s.
- Composition: free acid ≤3.0%; no single public purity value.
- Applications: low-colour, low-odour adhesion promotion in UV coatings, inks and adhesives; glass, metal, ceramics and stone; flame retardants and polycarboxylate superplasticiser synthesis.
KM2120
- Chemical name: bis(2-methacryloxyethyl) phosphate (bis-HEMA phosphate).
- Colour ≤10 Hazen; acid value 230–265 mgKOH/g; viscosity 550–720 mPa·s.
- Composition: free acid ≤2.5%; no single public purity value.
- Applications: low-colour, low-shrinkage UV coatings, inks, solder-resist inks, vacuum coating, glass/metal/wood adhesion and adhesives.
KM2130
- Chemical name: alkyl acrylate phosphate.
- Colour ≤80 Hazen; acid value 190–250 mgKOH/g; viscosity 600–1200 mPa·s.
- Composition: free acid ≤2.0%; no single public purity value.
- Applications: low-colour flexible UV coatings, inks, solder-resist inks, vacuum coating and glass/metal/wood adhesion.
KM2140
- Chemical name: special-structure alkyl acrylate phosphate.
- Colour ≤150 Hazen; acid value 120–145 mgKOH/g; viscosity 2100–2900 mPa·s.
- Composition: free acid ≤2.0%; no single public purity value.
- Applications: flexible, wetting, water- and solvent-resistant systems; nail gels, leather coatings, UV coatings/inks/adhesives, asphalt modification and adhesion to concrete, metal and glass.
KM2160
- Chemical name: multifunctional acrylate phosphate.
- Colour ≤100 Hazen; acid value 140–190 mgKOH/g; viscosity 180–270 mPa·s.
- Composition: free acid ≤2.0%; no single public purity value.
- Applications: low-viscosity, fast-curing and high-crosslink UV coatings, inks, adhesives and vacuum coating; metal, glass, ceramic and concrete adhesion.
Competitor public data
Nippon Kayaku KAYAMER PM-2
- Chemical name: 2-hydroxyethyl methacrylate phosphate (HEMA-P), structurally in the same family as KM2110; confirm the exact substance identity from the current manufacturer TDS.
- Colour ≤30 Hazen*; acid value 250–310*; viscosity 850–1500*; purity not publicly disclosed.
- Applications: HEMA-phosphate adhesion monomer for metal, glass and inorganic substrates in UV/EB systems. Confirm monoester/diester distribution, free acid and lot values against the current TDS/COA.
Kyoeisha LIGHT ESTER P-1M
- Chemical name: 2-methacryloyloxyethyl phosphate, a HEMA-P mono/diester mixture with a high monoester ratio.
- Appearance: pale yellow transparent liquid*; acid value 430–530*; viscosity 4000–6500*; density 1.310–1.390; purity not publicly disclosed.
- Applications: high-acidity monomer for waterborne or solventborne acrylic resins, improved latex stability and adhesion to glass, aluminium, cold-rolled steel, galvanised steel and stainless steel.
Eternal ETERMER 39
- Chemical name: 2-hydroxyethyl methacrylate phosphate, a methacrylate-modified phosphate ester. Market data also refers to it as Eternal EM39.
- Appearance: colourless to pale yellow transparent liquid; acid value, viscosity and purity are not publicly disclosed.
- Applications: adhesion promoter for UV coatings and inks. Its public chemical name matches KM2110, so it can be used as a direct benchmark sample, but current COA data and formulation testing are still required.
Sartomer / Arkema SR9050
- Composition: HEMA phosphate in EOEOEA, a solution of HEMA phosphate in ethoxyethoxyethyl acrylate.
- Colour <500 APHA; acid value not listed in the TDS (high acidity); viscosity 10 mPa·s; purity is not disclosed because the product is diluted.
- Applications: monofunctional, low-viscosity adhesion to aluminium, brass, tinplate and steel in UV/EB inks, coatings and adhesives; typical dosage 3–7%.
Sartomer / Arkema SR9051
- Composition: HEMA phosphate in TMP(3EO)TA, a solution of HEMA phosphate in ethoxylated trimethylolpropane triacrylate.
- Colour 5 Gardner; acid value not listed in the TDS; viscosity 250 mPa·s; purity is not disclosed because the product is diluted.
- Applications: trifunctional, fast-curing, high-hardness metal adhesion in UV/EB inks, coatings, 3D printing and adhesives; typical dosage 3–7%.
Solvay / Syensqo SIPOMER PAM-300
- Chemical name: phosphate ester of PPG monoacrylate.
- Appearance: dark-brown viscous liquid; acid value 110–115; viscosity 8000–12000 mPa·s; active content 95–97%; water ≤1.0%.
- Applications: reactive phosphate emulsifier/adhesion monomer for waterborne, solventborne and 100%-solids systems, including metal and glass adhesion, coatings and structural adhesives.
Key comparisons
- KM2110 and ETERMER 39 have the same public chemical name, HEMA phosphate. P-1M belongs to the same chemistry direction but has a much higher public acid value and viscosity.
- KM2110, PM-2 and ETERMER 39 belong to the HEMA-phosphate direction. P-1M is in the same family but has a much higher public acid value and viscosity.
- KM2120 is a bis-HEMA phosphate and differs structurally from PM-2; the two should not be treated as the same chemistry for benchmarking.
- SR9050 and SR9051 are diluted HEMA-phosphate products. Their acid value, viscosity and purity cannot be compared directly with undiluted monomers; dosage comparisons must be corrected for active phosphate content.
- KM2140 emphasises flexibility, wetting and water resistance. KM2160 emphasises low viscosity, fast reaction and high crosslink density. They should not be ranked by acid value alone.
- PAM-300 is a reactive phosphate emulsifier/adhesion monomer for waterborne and solventborne systems and has a different use logic from UV HEMA-phosphate monomers.
Recommended benchmark tests
Adhesion
Run cross-hatch or pull-off tests separately on glass, cold-rolled steel, galvanised steel, stainless steel and PET, and record substrate-dependent behaviour. Pay particular attention to how the high acidity of P-1M affects each metal.
Water and corrosion resistance
Test 40 C water immersion, boiling water and 3–5% NaCl salt spray. For HEMA phosphates, focus on blistering and adhesion retention; for PAM-300, focus on corrosion resistance after film formation in waterborne systems.
Compatibility and storage
Check compatibility with amines, basic fillers, pigments and photoinitiators. Observe thickening, gelling and separation, and compare acid value and viscosity after seven days at 40 C.
Cure and appearance
Using the same photoinitiator and dose, compare cure speed, surface cure, yellowing and odour. For SR9050/SR9051, convert by active phosphate content before comparing acid value or dosage.
Frequently asked questions
Are KM2110 and Eternal ETERMER 39 the same product?
They share the same public chemical name, HEMA phosphate, but monoester/diester distribution, free acid, water, inhibitor and impurity profile must be compared using each supplier's TDS/COA. The name alone does not justify equal-weight substitution.
How should KM2110 and Nippon Kayaku PM-2 be compared?
Both are in the HEMA-phosphate structural family, but monoester/diester distribution, free acid, water, colour and viscosity must still be compared using each supplier's TDS/COA. In the public data here, PM-2 has the higher acid-value and viscosity ranges. Final selection requires adhesion, water resistance, cure and storage testing.
Are KM2120 and PM-2 the same structure?
No. KM2120 is a bis-HEMA phosphate, while PM-2 belongs to the HEMA-phosphate direction. Their functionality and chemistry differ, so they are not interchangeable by structure.
Can the 10 and 250 mPa·s values of SR9050 and SR9051 be compared with undiluted monomers?
No. They are HEMA phosphate diluted in EOEOEA and TMP(3EO)TA respectively. The low viscosity comes largely from the reactive diluent; acid value and dosage should be corrected for active phosphate content.
Can SIPOMER PAM-300 replace KM2110?
Not directly. PAM-300 is a phosphate ester of PPG monoacrylate for waterborne/solventborne latex and wet adhesion, while KM2110 is a HEMA phosphate for UV free-radical systems. Each must be validated in its intended formulation.
Why are some values marked “not publicly disclosed” or with an asterisk?
“Not publicly disclosed” means the available public information did not provide a value; it does not mean the product lacks that property. Values marked with * come from public supplier or distributor sources and should be reconfirmed against the manufacturer's current TDS/COA.
Search aliases and boundaries
- Eternal ETERMER 39 is also widely searched as EM39. EM39L is a separate code without sufficient public data here; its suffix alone does not establish a lower acid value or viscosity.
- Kyoeisha P-1M and P-2M are related search terms, but this document does not treat P-2M as chemically identical to P-1M.
- Nippon Kayaku PM-2 belongs to the same HEMA-phosphate direction as KM2110. PM-1 is a separate search code and is not merged with PM-2 without a complete comparable dataset.
- Sartomer SR9050/SR9051 are also found in distributor pages under CD9050/CD9051-style search terms. Confirm the exact product code and current TDS rather than assuming the aliases identify the same product.
- Solvay SIPOMER PAM-300 and PAM-100 are positioned differently. This comparison includes PAM-300 because its chemistry and public data are explicit.
Data notes
KM values come from the current JCCM Chinese TDS. Competitor values come from public TDS, distributor pages or supplier information. Values marked with * for PM-2 and P-1M should be verified against current manufacturer TDS/COA. Colour methods include Hazen, APHA and Gardner and are not directly interchangeable. SR9050/SR9051 are diluted HEMA-phosphate products, so their acid value, purity and viscosity cannot be compared directly with undiluted monomers. Final grade selection must be based on current COA data and measured formulation performance.
Sources
- KM2110–KM2160: current JCCM Chinese TDS, 2026 edition.
- Sartomer SR9050 / SR9051: Arkema Sartomer Technical Data Sheets.
- Solvay SIPOMER PAM-300: Solvay/LookPolymers public property data.
- KAYAMER PM-2 and LIGHT ESTER P-1M: public supplier product pages or property data; values marked with * require manufacturer confirmation.
- ETERMER 39: Eternal Materials public and distributor information; acid value, viscosity and purity were not publicly disclosed.
Was this article helpful?
Need to apply this conclusion to your formulation?
Request a sample